Volume 25, Issue 2 , Pages 73-81, June 2009
99mTc thyroid imaging system using multiple imaging plates
Abstract
A system for taking static thyroid 99mTc images was devised by using multiple imaging plates (IPs) and a low-energy high resolution collimator. System spatial resolution of the IP systems and the gamma camera was determined by referring to standards set by the National Electrical Manufacturers Association. Sensitivity was represented by using lower detection limits (LDLs). The sensitivity and resolution of IP systems using 16 IP probes connecting two collimators and 9 IPs were determined by using a 20
ml thyroid phantom, and compared with the sensitivity of gamma cameras. The sensitivity of the IP systems increased in proportion to the number of IPs. The sensitivity and resolution of a probe using 6 IPs and a high resolution collimator were equivalent to or superior to the gamma camera for taking static thyroid 99mTc images. IP systems can be applied clinically as mobile static nuclear imaging devices. The performance of IP systems should be thoroughly investigated for combinations of various collimators and the number of IPs in order to verify their efficacy for imaging all organs.
Keywords: Thyroid, Imaging plate, Collimator
To access this article, please choose from the options below
PII: S1120-1797(08)00065-3
doi:10.1016/j.ejmp.2008.05.003
© 2008 Published by Elsevier Inc.
Volume 25, Issue 2 , Pages 73-81, June 2009
